MFC-J6530DW
![]() |
Ofte stillede spørgsmål og fejlfinding |
![](/g/b/img/product/mfcj6530dw_us_eu_as.jpg)
MFC-J6530DW
Dato: 10-04-2017 Id: faq00100347_500
Load Documents in the Automatic Document Feeder (ADF)
Use paper that is within the sizes and weights shown in the table. Always fan the pages before placing them in the ADF.
Document Sizes and Weights
Length *1: | 148 to 431.8 mm |
Width: | 105 to 297 mm |
Paper Weight: | 64 to 90 g/m² |
- IMPORTANT
-
DO NOT pull on the document while it is feeding.
DO NOT use paper that is curled, wrinkled, folded, ripped, stapled, paper clipped, pasted or taped.
DO NOT use cardboard, newspaper or fabric.
Make sure documents with correction fluid or written in ink are completely dry.
![](/g/b/img/faqend/faq00100347_500/eu_ot/en/1418331/topic1_icon5.png)
Your 2-sided documents can be faxed, copied, or scanned up to A3 size using the ADF.
- Fan the pages well.
- Adjust the paper guides (1) to fit the document size.
- Place your document face up in the ADF, as shown in the illustration, until you feel the document touch the feed rollers and the machine beeps.
If you loaded a small size document and cannot remove it, lift the ADF document support (1), and then remove the document.
- IMPORTANT
- DO NOT leave any documents on the scanner glass. If you do this, the ADF may jam.
Relaterede ofte stillede spørgsmål
MFC-J6530DW, MFC-J6930DW, MFC-J6935DW
Kontakt Brother Support, hvis du har brug for yderligere hjælp:
Feedback til indhold
Bemærk, at denne formular kun bruges til feedback.