MFC-J5335DW
![]() |
Ofte stillede spørgsmål og fejlfinding |
![](/g/b/img/product/mfcj5335dw_eu.jpg)
MFC-J5335DW
Dato: 04-01-2018 Id: faq00100279_001
Change LDAP Configuration Using Web Based Management
Use Web Based Management to configure your LDAP settings in a web browser.
- Start your web browser.
-
Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).
For example:
http://192.168.1.2 -
Type a password if you have set one, and then click
.
- Click Network on the machine's web page.
- Click Protocol in the left navigation bar.
- Select the LDAP check box, and then click Submit.
- Restart your Brother machine to activate the configuration.
-
On your computer, in Web Based Management's Address Book tab, select LDAP in the left navigation bar.
- LDAP Search
- LDAP Server Address
- Port (The default port number is 389.)
- Search Root
- Authentication
-
Username
This selection will be available depending on the authentication method used. -
Password
This selection will be available depending on the authentication method used.- If the LDAP server supports Kerberos authentication, we recommend selecting Kerberos for the Authentication settings. It provides strong authentication between the LDAP server and your machine.
- You must configure the SNTP protocol (network time server), or you must set the date, time and time zone correctly on the control panel for Kerberos authentication.
-
Kerberos Server Address
This selection will be available depending on the authentication method used. - Timeout for LDAP
- Attribute of Name (Search Key)
- Attribute of E-mail
- Attribute of Fax Number
- When finished, click Submit. Make sure the Status field reads OK.
Feedback til indhold
Giv feedback herunder, så vi kan forbedre vores support.
Trin 1: Hvor hjælpsom har oplysningerne på denne side været?
Trin 2: Ønsker du at tilføje kommentarer?
Bemærk, at denne formular kun bruges til feedback.