DCP-J1200W(E)
 |
Ofte stillede spørgsmål og fejlfinding |
DCP-J1200W(E)
Dato: 31-03-2021 Id: faq00100029_029
Enable the Brother machine's network interface.
Follow the steps below to enable the Brother machine's network interface.
-
Press
(Wi-Fi) and 
(Stop) simultaneously.
The Power LED, Warning LED, and Ink LED light up for one second, and then the Wi-Fi LED starts blinking. -
Press MONO START to enable Wi-Fi.
- When Wi-Fi is enabled, the Power LED blinks once, and then the Power LED and Wi-Fi LED are lit.
- When Wi-Fi is disabled, the Power LED blinks twice, and then the Power LED is lit.
(For wireless network users)
If you want to set up your Brother machine on a wireless network, see the following FAQ.
> Click here to see how to set up your Brother machine on a wireless network.
If your Brother machine still having an issue over the network feature, see the Related FAQs at the end of the page.
Feedback til indhold
Giv feedback herunder, så vi kan forbedre vores support.
Trin 1: Hvor hjælpsom har oplysningerne på denne side været?
Trin 2: Ønsker du at tilføje kommentarer?
Bemærk, at denne formular kun bruges til feedback.