MFC-9840CDW
 |
Ofte stillede spørgsmål og fejlfinding |
MFC-9840CDW
Dato: 11-05-2020 Id: faq00100029_017
Enable the Brother machine's network interface.
Follow the steps below to enable or disable the Brother machine's network interface.
A wired and a wireless network connection cannot be used at the same time. Enable the network connection type you want to use and then disable the other.
-
Press Menu.
-
Press the Up or Down arrow key to select LAN. Press OK.
-
Press the Up or Down arrow key to select Wired or WLAN. Press OK.
-
Press the Up or Down arrow key to select Wired Enable or WLAN Enable. Press OK.
-
Press the Up or Down arrow key to select On or Off. Press OK.
- Press Stop/Exit.
(For wireless network users)
If you want to set up your Brother machine on a wireless network, see the following FAQ.
> Click here to see how to set up your Brother machine on a wireless network.
If your Brother machine still having an issue over the network feature, see the Related FAQs at the end of the page.
Relaterede ofte stillede spørgsmål
- I'm trying to install the driver with network settings, but I cannot locate a network connected Brother machine and complete the driver installation. (For Windows)
- I can print but cannot scan via network. (For Windows)
- I can print but cannot scan via network. (For Mac)
- The printer status is Offline or Paused.
- "Offline" appears on the Status Monitor.
- I cannot print using my Brother machine on a wireless network (Mac)
- I cannot print using my Brother machine on a wireless network (Windows)
- I cannot print using my Brother machine on a wired network. (Windows/macOS)
Kontakt Brother Support, hvis du har brug for yderligere hjælp:
Feedback til indhold
Giv feedback herunder, så vi kan forbedre vores support.
Trin 1: Hvor hjælpsom har oplysningerne på denne side været?
Trin 2: Ønsker du at tilføje kommentarer?
Bemærk, at denne formular kun bruges til feedback.