HL-L5100DN(T)
![]() |
Ofte stillede spørgsmål og fejlfinding |
![](/g/b/img/product/hll5100dn_us_eu_as.jpg)
HL-L5100DN(T)
Dato: 03-03-2016 Id: faq00003168_009
Unpack your Brother machine
Follow the steps below to unpack the machine:
NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.
-
Open the box.
-
Remove the Quick Setup Guide, which contains initial installation instructions for your Brother machine.
-
Remove the power cord.
-
Remove the packing foam.
-
Lift the machine out of the box.
-
Remove the plastic bag and the tape.
-
Open the front cover.
-
Remove the packing material.
-
Remove the drum unit and toner cartridge assembly.
-
Place the drum unit and toner cartridge assembly on a clean, flat surface.
-
Remove the orange packing material.
-
Install the drum unit and toner cartridge assembly back into the machine.
-
Close the front cover.
-
Pull the paper tray out of the machine.
-
Take out the packing material from the paper tray.
-
Push the paper tray completely into the machine.
Feedback til indhold
Giv feedback herunder, så vi kan forbedre vores support.
Trin 1: Hvor hjælpsom har oplysningerne på denne side været?
Trin 2: Ønsker du at tilføje kommentarer?
Bemærk, at denne formular kun bruges til feedback.