MFC-8510DN
![]() |
Ofte stillede spørgsmål og fejlfinding |
![](/g/b/img/product/mfc8510dn_eu_as_cn.jpg)
MFC-8510DN
Dato: 07-11-2012 Id: faq00003023_000
Configure the boot method through the front panel of my Brother machine.
Follow the steps below to configure the boot method.
- Press Menu.
- Press the Up or Down arrow key to choose Network and press OK.
- Press the Up or Down arrow key to choose TCP/IP and press OK.
- Press the Up or Down arrow key to choose Boot Method and press OK.
- Press the Up or Down arrow key to choose Auto, Static, RARP, BOOTP or DHCP and then press OK.
- For all selections, except Static, you will be asked to specify the number of times the machine tries to obtain an IP address - IP Boot Tries. The default is 3. Press OK.
- Press Stop/Exit.
Kontakt Brother Support, hvis du har brug for yderligere hjælp:
Feedback til indhold
Giv feedback herunder, så vi kan forbedre vores support.
Trin 1: Hvor hjælpsom har oplysningerne på denne side været?
Trin 2: Ønsker du at tilføje kommentarer?
Bemærk, at denne formular kun bruges til feedback.