MFC-260C
![]() |
Ofte stillede spørgsmål og fejlfinding |
![](/g/b/img/product/mfc260c_eu_as.jpg)
MFC-260C
Dato: 22-07-2008 Id: faq00002521_000
When I scan the document with using ScanSoft™ PaperPort™ 11 SE , the bottom of the document is cut off. What should I do?
The paper size setting of ScanSoft™ PaperPort™ 11 SE may be set as "Letter". Change the paper size settings to "A4" by following the procedures below:
- Click Scan or Get Photo.
- Select the profile that you want to change the settings of.
- Click Settings....
- Open the Scan tab.
- Select A4 from the size selection.
- Click OK to close the window.
DCP-135C, DCP-145C, DCP-150C, DCP-163C, DCP-167C, DCP-350C, DCP-357C, DCP-383C, DCP-385C, DCP-387C, DCP-560CN, DCP-585CW, DCP-6690CW, DCP-7030, DCP-7045N, DCP-770CW, DCP-9040CN, DCP-9042CDN, DCP-9045CDN, MFC-250C, MFC-260C, MFC-290C, MFC-297C, MFC-465CN, MFC-490CW, MFC-5860CN, MFC-6490CW, MFC-6890CDW, MFC-7320, MFC-7440N, MFC-7840W, MFC-790CW, MFC-885CW, MFC-9440CN, MFC-9450CDN, MFC-9840CDW, MFC-990CW
Kontakt Brother Support, hvis du har brug for yderligere hjælp:
Feedback til indhold
Giv feedback herunder, så vi kan forbedre vores support.
Trin 1: Hvor hjælpsom har oplysningerne på denne side været?
Trin 2: Ønsker du at tilføje kommentarer?
Bemærk, at denne formular kun bruges til feedback.