Ofte stillede spørgsmål og fejlfinding

Luk

DCP-750CW

Ofte stillede spørgsmål og fejlfinding

Ofte stillede spørgsmål og fejlfinding

DCP-750CW

Er det ikke dit produkt?

Dato: 11-05-2015 Id: faq00000559_002

When I try to OCR into WordPad using the ScanSoft® PaperPort® SE with OCR or the Brother ControlCenter3, the text comes out as gibberish. This started after I installed Windows XP Service Pack 2 (SP2). Why and what should I do?

This issue is caused because Windows XP SP2 does not support the WordPad default file type (.wri) for PaperPort's Scan to OCR. In order to correct this issue, you need to change the default file type. Please follow the instructions below:

 

 

OCR from ScanSoft® PaperPort® SE:

  1. Right click the WordPad icon on the PaperPort® OCR "Send To Bar" and click Send To Options....

 

  1. Under "Convert to file type:", Windows Write, wri should appear. Click the drop down arrow to the right and click one of the other file types that fits your needs. We recommend an .rtf file type.

 

  1. Click OK. The default file type should now be changed and the OCR operation should perform correctly.

Scan to OCR from ControlCenter3:

  1. Right click the OCR icon from the ControlCenter3 and click ControlCenter Configuration.
    (The image below is the Classic user interface.)

 

  1. Click the Software Button tab. Under "File Type", Windows Write, wri should appear. Click the drop down arrow to the right and click one of the other file types that fits your needs. We recommend an .rtf file type.

 

  1. Click OK. The default file type should now be changed and the OCR operation should perform correctly.
 

Kontakt Brother Support, hvis du har brug for yderligere hjælp:

Feedback til indhold

Giv feedback herunder, så vi kan forbedre vores support.
Trin 1: Hvor hjælpsom har oplysningerne på denne side været?
Trin 2: Ønsker du at tilføje kommentarer?

Bemærk, at denne formular kun bruges til feedback.

Indsend