MFC-8220
![]() |
Ofte stillede spørgsmål og fejlfinding |
![](/g/b/img/product/mfc8220_eu.jpg)
MFC-8220
Dato: 24-08-2006 Id: faq00000261_002
How do I improve the copy or fax quality?
Please clean the Document Scanner, the Laser Scanner window and the Corona Wire inside the drum unit. Follow the steps listed below:
To clean the Document Scanner:
- Unplug the telephone line and then the power cord.
When you reconnect these lines later, connect the power cord first, then the telephone line. - Lift the control panel cover.
-
Clean the flat white pressure bar and glass cover under the bar. Moisten a small, clean, soft, lint-free cloth with isopropyl alcohol and carefully remove dirt from the glass cover and the white bar.
![](/g/b/img/faqend/faq00000261_002/eu_ot/en/92137/Tro-01414.gif)
To clean the Laser Scanner window:
-
Turn the MFC power switch off, unplug the MFC from the AC outlet and telephone cord and open the front cover.
-
Remove the drum unit and toner cartridge assembly.
-
Gently clean the scanner window by wiping it with a clean soft DRY cloth. Do not use isopropyl alcohol.
![](/g/b/img/faqend/faq00000261_002/eu_ot/en/92136/scanner_window.gif)
To clean the Corona Wire inside the drum unit:
-
Clean the primary corona wire inside the drum unit by gently sliding the blue tab from right to left several times.
-
Return the blue tab and snap it into the Home position (t).
We recommend placing the drum unit and toner cartridge assembly on a cloth or large disposable paper to avoid spilling and scattering toner.
![](/g/b/img/faqend/faq00000261_002/eu_ot/en/92135/corona_wire.gif)
-
Reinstall the drum unit and toner cartridge assembly into the MFC.
-
Close the front cover.
-
Plug in the power cord first, then the telephone cord.
-
Turn the power switch on.
Kontakt Brother Support, hvis du har brug for yderligere hjælp:
Feedback til indhold
Giv feedback herunder, så vi kan forbedre vores support.
Trin 1: Hvor hjælpsom har oplysningerne på denne side været?
Trin 2: Ønsker du at tilføje kommentarer?
Bemærk, at denne formular kun bruges til feedback.