HL-L2357DW
Ofte stillede spørgsmål og fejlfinding |
HL-L2357DW
Dato: 27-04-2018 Id: faq00000231_057
Envelope creases
Check the following points to resolve the issue:
NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.
-
Make sure the two green levers inside the back cover are pulled down to the envelope position when you print envelopes. After you have finished printing, reset the levers back to their original position. Pull up the levers until they stop.
- Make sure envelopes are printed with the back cover (face up output tray) opened.
-
(For models with Manual Feed Slot)
Make sure envelopes are fed only from the manual feed slot. -
(For models with MP Tray)
Make sure envelopes are fed only from the MP tray.
Kontakt Brother Support, hvis du har brug for yderligere hjælp:
Feedback til indhold
Giv feedback herunder, så vi kan forbedre vores support.
Trin 1: Hvor hjælpsom har oplysningerne på denne side været?
Trin 2: Ønsker du at tilføje kommentarer?
Bemærk, at denne formular kun bruges til feedback.