HL-L5100DN(T)
 |
Ofte stillede spørgsmål og fejlfinding |
HL-L5100DN(T)
Dato: 26-02-2020 Id: faq00000110_500
Set Sleep Mode Countdown
The Sleep Mode (or Power Save Mode) setting can reduce power consumption. Select how long the machine must be idle before it goes into Sleep Mode. The Sleep Mode timer is reset when the machine receives a print job.
When the machine is in Sleep Mode, it acts as if it is turned off. The machine will wake up and start printing when it receives a print job. Use these instructions to set a time delay (countdown) before the machine enters Sleep Mode.
HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN
- Press
or 
to select the [General Setup] option, and then press OK. - Press or to select the [Ecology] option, and then press OK.
- Press or to select the [Sleep Time] option, and then press OK.
- Press or to enter the length of time, in minutes, that the machine should remain idle before entering Sleep Mode. Press Go.
HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
- Press
. - Enter the length of time (maximum 50 minutes) the machine will remain idle before entering Sleep Mode, and then press [OK].
- Press
.
HL-L5000D, HL-L5100DN(T), HL-L5200DW(T), HL-L6250DN, HL-L6300DW(T), HL-L6400DW(T), HL-L6450DW
Kontakt Brother Support, hvis du har brug for yderligere hjælp:
Feedback til indhold
Giv feedback herunder, så vi kan forbedre vores support.
Trin 1: Hvor hjælpsom har oplysningerne på denne side været?
Trin 2: Ønsker du at tilføje kommentarer?
Bemærk, at denne formular kun bruges til feedback.