FS-40
Nejčastější dotazy a pokyny pro odstraňování potíží |
FS-40
Datum: 12/12/2018 ID: faqh00000017_002
How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- Use only the ungummed hook-and-loop fastener which is for sewing. If the glue is attached to the needle or the bobbin hook race, it may cause malfunction.
- If the hook-and-loop is sewn with the thin needle (65/9-75/11), the needle may bend or break.
- Before start sewing, baste together the fabric and the hook-and-loop fastener.
Make sure that the needle passes through the hookand-loop fastener by turning the handwheel and lower the needle into the hook-and-loop fastener before sewing. And then, sew the edge of the hookand-loop fastener at a slow speed.
If the needle does not pass through the hook-andloop fastener, replace the needle with the needle for thick fabrics.
Edge of the hook-and-loop fastener |
Související nejčastější dotazy
Potřebujete-li další pomoc, kontaktujte zákaznický servis společnosti Brother:
Názory na obsah
Chcete-li nám pomoci vylepšit naši podporu, uveďte níže vaše názory.
Krok 1: Jak vám informace na této stránce pomohly?
Krok 2: Chcete uvést další poznámky?
Upozorňujeme vás, že tento formulář slouží pouze pro názory.