DCP-T420W
Nejčastější dotazy a pokyny pro odstraňování potíží |
DCP-T420W
Datum: 01/03/2024 ID: faq00100704_500
Configure Network Settings Using the Control Panel
To configure the machine for your network, use the control panel buttons.
Network Settings
Function | Button 1 | Button 2 | Instructions |
---|
Enable the One Push Method of Wi-Fi Protected Setup™ (WPS). | WiFi Button/LED | - | Press the button three times. |
Enable the PIN Method of Wi-Fi Protected Setup™ (WPS). | WiFi Button/LED | - | Press the button five times. |
Enter Wi-Fi Mode. | WiFi Button/LED | Press the buttons simultaneously. |
Set Wireless Direct to On. Print the Wireless Direct Information Sheet. | WiFi Button/LED | Copy Shortcut | Press the buttons simultaneously. |
Print the Network Configuration Report Sheet. | WiFi Button/LED | Mono Start | Press the buttons simultaneously. |
Restart Wi-Fi and Wireless Direct. Use this function to solve wireless network problems. | WiFi Button/LED | Colour Start | Press the buttons simultaneously. |
Wi-Fi Mode
Function | Button | Instructions |
---|
Print the WLAN Report. | WiFi Button/LED | Press the button once. |
Enable or disable Wireless Direct. | Copy Shortcut | Press the button once. |
Enable or disable Wi-Fi. | Mono Start | Press the button once. |
Reset the Network settings. | Colour Start | Press and hold the button for two seconds. |
DCP-T420W, DCP-T425W, DCP-T426W
Potřebujete-li další pomoc, kontaktujte zákaznický servis společnosti Brother:
Názory na obsah
Chcete-li nám pomoci vylepšit naši podporu, uveďte níže vaše názory.
Krok 1: Jak vám informace na této stránce pomohly?
Krok 2: Chcete uvést další poznámky?
Upozorňujeme vás, že tento formulář slouží pouze pro názory.