ADS-2700W
Nejčastější dotazy a pokyny pro odstraňování potíží |
ADS-2700W
Datum: 05/09/2022 ID: faq00100458_500
Set Up the Brother Machine Using Remote Setup (Windows®)
-
Click .
-
Select your model name in the Discover Devices dialog box, and then click Connect.The Remote Setup Program window appears.
-
Configure the settings as needed.
-
Your screen may differ from the screen shown.
- Export
- Click to save the current configuration settings to a file.
- Import
- Click to read the settings from a file.
- OK
- Click to start uploading data to the machine, and then exit the Remote Setup Program. If an error message appears, confirm that your data is correct, and then click OK.
- Cancel
- Click to exit the Remote Setup Program without uploading data to the machine.
- Apply
- Click to upload data to the machine without exiting the Remote Setup Program.
-
-
Click OK.
-
If your computer is protected by a firewall and is unable to use Remote Setup, you may need to configure the firewall settings to allow communication through port numbers 52515-52614.
-
If using Windows® Firewall and you installed the scanner driver, the necessary firewall settings have already been set.
Související nejčastější dotazy
ADS-2200, ADS-2700W
Potřebujete-li další pomoc, kontaktujte zákaznický servis společnosti Brother:
Názory na obsah
Chcete-li nám pomoci vylepšit naši podporu, uveďte níže vaše názory.
Krok 1: Jak vám informace na této stránce pomohly?
Krok 2: Chcete uvést další poznámky?
Upozorňujeme vás, že tento formulář slouží pouze pro názory.