MFC-L3770CDW
Nejčastější dotazy a pokyny pro odstraňování potíží |
MFC-L3770CDW
Datum: 07/01/2019 ID: faq00100209_002
Load Paper in the Multi‑purpose Tray (MP Tray)
When you load a different size and type of paper in the tray, you must also change the Paper Size and Paper Type settings in the machine, or on your computer.
- Plain Paper
- Thin Paper
- Thick Paper
- Recycled Paper
- Bond Paper
- Glossy Paper
-
Lift the support flap to prevent paper from sliding off the face down output tray.
-
Open the MP tray and lower it gently.
-
Pull out the MP tray support (1) and unfold the flap (2).
-
Slide the MP tray paper guides to fit the width of the paper you are using.
-
Load paper with the printing surface face up in the MP tray.
- Make sure the paper is below the maximum paper mark (1).
- When using glossy paper, load only one sheet at a time in the MP tray to avoid a paper jam.
- When you use preprinted paper, load the paper in the correct orientation.
-
To remove a small printout from the output tray, use both hands to lift up the scanner cover as shown in the illustration.
-
You can still use the machine while the scanner cover is up. To close the scanner cover, gently push it down with both hands.
Související nejčastější dotazy
Potřebujete-li další pomoc, kontaktujte zákaznický servis společnosti Brother:
Názory na obsah
Chcete-li nám pomoci vylepšit naši podporu, uveďte níže vaše názory.
Krok 1: Jak vám informace na této stránce pomohly?
Krok 2: Chcete uvést další poznámky?
Upozorňujeme vás, že tento formulář slouží pouze pro názory.