DCP-T510W
![]() |
Nejčastější dotazy a pokyny pro odstraňování potíží |
![](/g/b/img/product/dcpt510w_all.jpg)
DCP-T510W
Datum: 11/05/2020 ID: faq00100029_008
Enable the Brother machine's network interface.
Follow the steps below to enable or disable the Brother machine's network interface.
- Press Settings or Menu.
- Press the Up or Down arrow key to select Network and press OK.
- Press the Up or Down arrow key to select WLAN Enable and press OK.
- Press the Up or Down arrow key to select On or Off.
- Press OK.
- Press Stop/Exit.
(For wireless network users)
If you want to set up your Brother machine on a wireless network, see the following FAQ.
> Click here to see how to set up your Brother machine on a wireless network.
If your Brother machine still having an issue over the network feature, see the Related FAQs at the end of the page.
Související nejčastější dotazy
- I'm trying to install the driver with network settings, but I cannot locate a network connected Brother machine and complete the driver installation. (For Windows)
- I cannot scan via network.
- The printer status is Offline or Paused.
- "Offline" appears on the Status Monitor.
- My Brother machine could not be found over the network when I installed drivers on my computer.
- I cannot print using my Brother machine on a wireless network (Mac)
- I cannot print on a wireless (Wi-Fi) network (Windows)
Potřebujete-li další pomoc, kontaktujte zákaznický servis společnosti Brother:
Názory na obsah
Chcete-li nám pomoci vylepšit naši podporu, uveďte níže vaše názory.
Krok 1: Jak vám informace na této stránce pomohly?
Krok 2: Chcete uvést další poznámky?
Upozorňujeme vás, že tento formulář slouží pouze pro názory.