HL-2140
 |
Nejčastější dotazy a pokyny pro odstraňování potíží |
HL-2140
Datum: 19/09/2007 ID: faq00000080_014
What is the recommended paper?
We recommend the following paper types for this printer.
| Paper Type | Europe | USA |
| Plain paper |
Xerox Premier TCF 80 g/m2 |
Xerox 4200DP 20 lb Hammermill Laser Paper (24 lb=90 g/m2) |
| Recycled paper | Xerox Recycled Supreme 80 g/m2 | - |
| Labels | Avery laser label L7163 | Avery laser labels white #5160 |
| Envelope | Antalis River series (DL) | - |
- Before you buy a lot of paper, test a small quantity to make sure that the paper is suitable.
- Use paper that is made for plain-paper copying.
- Use paper that is 75 to 90 g/m2 (20 to 24 lb).
- Use neutral paper. Do not use acidic or alkaline paper.
- Use long-grain paper.
- Use paper with a moisture content of approximately 5%.
- This printer can use recycled paper that meets the DIN 19309 specifications.
- DO NOT use ink jet paper because it may cause a paper jam or damage your printer.
- Preprinted paper must use ink that can withstand the temperature of the printer's fusing process (200 degrees centigrade).
- If you use bond paper, paper having a rough surface or paper that is wrinkled or creased, the paper may exhibit degraded performance.
If you use paper that is not recommended, a paper jam or misfeed may occur in the printer.
Související nejčastější dotazy
Potřebujete-li další pomoc, kontaktujte zákaznický servis společnosti Brother:
Názory na obsah
Chcete-li nám pomoci vylepšit naši podporu, uveďte níže vaše názory.
Krok 1: Jak vám informace na této stránce pomohly?
Krok 2: Chcete uvést další poznámky?
Upozorňujeme vás, že tento formulář slouží pouze pro názory.