MFC-L8900CDW
Nejčastější dotazy a pokyny pro odstraňování potíží |
MFC-L8900CDW
Datum: 23/03/2022 ID: faq00000006_042
Vertical colored streaks or bands appear on the page
NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.
Check the following points to resolve the issue:
-
(For models with Automatic Document Feeder only)
Wipe the scanner glass strip with a dry lint free soft cloth.
> Click here to see how to clean the scanner glass strip. -
Clean all four corona wires (one for each color) inside the drum unit by sliding the green tab.
> Click here to see how to clean the corona wires.
-
Make sure the green tab of the corona wire is in the home position (1).
-
Replace the toner cartridge that matches the color of the streak or band.
To identify the color of the toner cartridge, follow the steps below:- > Click here to print the chart. [345KB/ PDF]
- Compare your printed document with the printed chart to identify the color causing the issue.
-
Replace the toner cartridge of the color.
> Click here to see how to replace the toner cartridge.
-
Install a new drum unit.
> Click here to see how to replace the drum unit.
DCP-L8410CDW, MFC-EX670, MFC-L8690CDW, MFC-L8900CDW, MFC-L9570CDW(T), MFC-L9630CDN, MFC-L9635CDN, MFC-L9670CDN
Potřebujete-li další pomoc, kontaktujte zákaznický servis společnosti Brother:
Názory na obsah
Chcete-li nám pomoci vylepšit naši podporu, uveďte níže vaše názory.
Krok 1: Jak vám informace na této stránce pomohly?
Krok 2: Chcete uvést další poznámky?
Upozorňujeme vás, že tento formulář slouží pouze pro názory.