Innov-is NV180
![]() |
常见问题解答与故障排除 |
![](/g/b/img/product/hf_inovnv180eas.jpg)
Innov-is NV180
日期: 2017-12-08 ID: faqh00100870_000
It is difficult to remove the needle plate cover from the machine. (How do I remove the needle plate cover from the machine?)
To remove the needle plate cover from the machine easily, follow the procedure below.
How to remove the needle plate cover
-
Press
(Needle position button) once or twice to raise the needle.
-
Turn off the machine.
-
Unplug the power cord from the power supply jack on the right side of the machine.
-
Raise the presser foot to remove the needle, presser foot and presser foot holder.
-
Remove the flat bed attachment or the embroidery unit if either is attached.
-
Slide the bobbin cover latch to the right and remove the bobbin cover.
(1) Bobbin cover
(2) Latch -
Place the index finger of your right hand near the bottom of the latch on the needle plate cover. Insert the tip of the index finger of your left hand into the notch at the back of the needle plate cover. Place the thumb of your left hand at the front of the needle plate cover.
-
Slide the needle plate cover toward you to remove it.
相关常见问题解答
Innov-is M370, Innov-is M380D, Innov-is NV180, Innov-is NV180D, Innov-is NV180K
如果需要更多的帮助,请联系 Brother 客户服务中心:
内容反馈
请在下方提供您的反馈,帮助我们改进支持服务。