S90
![]() |
常见问题解答与故障排除 |
![](/g/b/img/product/hf_s90eas.jpg)
S90
日期: 2020-11-10 ID: faqh00000402_002
"E7" message appears on the LCD.
Cause
This message is displayed when an erroneous operation is performed as follows.
- The operation button such as the Start/Stop button, the Reverse/Reinforcement stitch button or the Needle position button is pressed while the twin needle mode is active, and a stitch pattern that cannot be sewn with the twin needle is selected.
- The foot controller is pressed while the twin needle mode is active, and a stitch pattern that cannot be sewn with the twin needle is selected.
(1) Needle mode indicator
or
shows that the twin needle mode is selected.
Solution
-
When you want to sew a pattern you selected :
Switch to the single needle mode, and replace the twin needle with a single needle before continuing the operation.
To change the needle mode, follow the steps below.
-
Turn off the machine.
-
Holding down
(Plus key of the stitch selection keys (for digit in the ones place)), turn on the machine.
-
After the machine has turned on, release the key.
The needle mode changes to the single needle mode.(1) Needle mode indicator
or
shows that the single needle mode is selected.
-
Turn off the machine.
-
When you want to sew with the twin needle :
Select a pattern that can be sewn with the twin needle.
Refer to "Stitch Chart" to learn stitches that can be sewn with a twin needle.
GP60X, S90, X1100
如果需要更多的帮助,请联系 Brother 客户服务中心:
内容反馈
请在下方提供您的反馈,帮助我们改进支持服务。