MFC-8520DN
![]() |
常见问题解答与故障排除 |
![](/g/b/img/product/mfc8520dn_eu_cn.jpg)
MFC-8520DN
日期: 2012-05-10 ID: faq00002837_014
I still receive the error message "Drum End Soon", "Replace (Parts) Drum (Unit)" or "Drum Stop" after I replace the drum unit with a new one.
The error message "Drum End Soon", "Replace (Parts) Drum (Unit)" or "Drum Stop" will continue to appear if the drum counter was not reset when you replace the drum unit with a new one.
To clear the error message, you need to reset the drum counter as instructed below.
If you want to clear an error message related to the toner replacement, click here to see how to clear an error message after you replaced the toner cartridge.
Please follow the steps below to reset the drum counter.
NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.
The Brother machine has separate consumables the toner cartridge and the drum unit. Verify you replace only the drum unit and not the toner cartridge. If you want to know their difference, refer to "What is the difference between the toner cartridge and the drum unit?"
Please reset the drum counter only when you replace the drum unit. If you reset the drum counter during the life of the drum unit currently being used, the remaining drum life will not be displayed accurately.
*If your Brother machine has a touchscreen, please follow the steps under "For touchscreen models" below.
- Make sure that the machine is turned on.
- Open the front cover.
- Press Clear.
- To confirm you are installing a new drum, press 1.
- When the LCD shows Accepted, close the front cover of the machine.
- Press Stop/Exit to interrupt the error temporarily.
- Press Menu.
- Press the Up or Down arrow key to display Machine Info.. Press Machine Info..
- Press Reset Menu.
- Press Drum.
- The machine will display Reset Drum?.
- Press Yes, and then press Stop/Exit.
Brother strongly recommends that customers use only genuine Brother drum units and/or toner cartridges Each Brother laser printer is designed to work at pre-set temperatures that are matched exactly to each of our individual toner formulations. Each individual component is designed to work with the other to ensure quality and reliability. Using non-Brother supplies may affect the hardware performance, print quality and machine reliability. The Brother limited warranty does not apply to any problem that is caused by the use of unauthorized third party drum units, toner cartridges or toner.
If the error message still continues to appear, please contact Brother Customer Service from "Contact Us".