MFC-J5910DW
常见问题解答与故障排除 |
MFC-J5910DW
日期: 2011-07-13 ID: faq00000366_017
Out of Memory
There are some cases when the LCD shows this message. Follow the solution suitable for your case.
- Cause 1: The machine's memory is full.
Press Stop/Exit and wait until the other operations in progress finish and then try again.
If the Out of Memory message appears while scanning a document, press Stop/Exit to cancel or Black (Mono) Start to send the scanned pages.
If more than one page has been scanned, press Black (Mono) Start to send the portion that is in the machine's memory.
- Cause 2: The fax memory is full.
Clear the data in the memory. To gain extra memory, you can turn off Memory Receive.
Turning off Memory Receive operations
- Press Menu and choose Fax => Setup Receive => Memory Receive => Off.
- If received faxes remain in your machine's memory when you change the Memory Receive Operations, the LCD will ask you one of the following questions:
Print All Fax?
Erase All Fax (Doc)?
If you press Yes , faxes in the memory will be erased or printed before the setting changes. If a backup copy has already been printed it will not be printed again.
- Cause 3: The memory card or USB Flash memory drive you are using does not have enough free space to scan the document.
Delete unused files from your memory card or USB Flash memory drive to make some free space and then try again.
MFC-J5910DW, MFC-J625DW
如果需要更多的帮助,请联系 Brother 客户服务中心:
内容反馈
请在下方提供您的反馈,帮助我们改进支持服务。