ADS-2400N
FAQ & Fehlerbehebung |
ADS-2400N
Datum: 14.05.2019 Kennnummer: faq00100466_001
Your Brother Machine Cannot Scan over the Network
Cause | Action | Interface |
You did not select Accept in the security alert dialog box during the Brother Device installation, applications’ start-up process, or when using the scanning features. | If you did not select Accept in the security alert dialog box, the firewall function of your security software may be denying access. Some security software may block access without showing a security alert dialog box. To allow access, see your security software instructions or ask the manufacturer. |
Wired/Wireless |
Your security software blocks your machine's access to the network. | The following port numbers are used for Brother network features:
|
Wired/Wireless |
Your Brother machine was not assigned an available IP address. |
Confirm the IP address and the Subnet Mask. Verify that both the IP addresses and Subnet Masks of your computer and the Brother machine are correct and located on the same network. For more information about how to verify the IP address and the Subnet Mask, ask your network administrator. |
Wired/Wireless |
You cannot connect the Brother machine to the network using wireless capabilities. | Press (Settings) > Network > WLAN > WLAN Status > Status. If the LCD displays Connection Failed:, ask your network administrator whether your IP address is valid or not. |
Wired/Wireless |
If you have checked and tried all of the actions, but your Brother machine still cannot scan, uninstall the Brother software and drivers and reinstall them.
Relevante FAQ
ADS-2400N, ADS-2800W, ADS-3000N, ADS-3600W
Wenn Sie weitere Unterstützung benötigen, wenden Sie sich an den Brother-Kundendienst:
Rückmeldung zum Inhalt
Helfen Sie uns dabei, unseren Support zu verbessern und geben Sie uns unten Ihre Rückmeldung.
Schritt 1: Wie hilfreich sind für Sie die Informationen auf dieser Seite?
Schritt 2: Möchten Sie noch ein paar Bemerkungen hinzufügen?
Bitte beachten Sie, dass dieses Formular nur für Rückmeldungen verwendet wird.