CM900
![]() |
FAQ et Diagnostic |
Date: 10.07.2017 ID: faqh00000714_001
Loading and Unloading the Mat
The cutting mats used by this machine have been redeveloped with a different design, type, function, etc.
For details, refer to Important information about Mat.
Loading the Mat
-
Attach the material that will be cut to the mat.
For details on attaching material to the mat, see Mat and Material Combinations.
-
While holding the mat level and lightly inserting it into the feed slot, press
in the operation panel.
Lightly insert the mat so that it aligns with the guides on the left and right sides of the feed slot and is tucked under the feed rollers.
(1) Guides
(2) Feed rollers
>> The mat is fed in to complete the preparations for cutting.
Unloading the Mat
-
Press
in the operation panel to feed out the mat.
-
Peel off the material from an area that is easily removable, such as a corner, and then slowly peel while maintaining an even pressure.
-
Holding the mat with your hand, use the included spatula to carefully peel off the cutout patterns.
(1) Spatula For instructions on how to peel off the material, see How to attach the material to the mat.
FAQ connexes
CM700, CM900
Pour toute assistance supplémentaire, contactez le service clientèle de Brother:
Commentaires sur le contenu
Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.
Étape 1: Comment qualifieriez-vous les informations figurant sur cette page?
Étape 2: Souhaitez-vous ajouter des commentaires?
Ce formulaire a pour seul but de nous faire part de vos commentaires.