PR655
![]() |
FAQ et Diagnostic |
Date: 04.03.2009 ID: faqh00000321_000
Why cannot the needle threader be used?
The thread could be jamming due to several reasons.
- Make sure the needle is correctly inserted with the flat side facing the back and pushed up into the machine as far as possible.
- Needle is incorrect. Be sure to use the embroidery needle(s).
- The needle is not at the correct position.
Touch the key to move the desired needle bar to be threaded into embroidering position.
- The hook on the automatic needle-threading mechanism is bent. Consult nearest authorized Dealer or Service Center.
Pour toute assistance supplémentaire, contactez le service clientèle de Brother:
Commentaires sur le contenu
Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.
Étape 1: Comment qualifieriez-vous les informations figurant sur cette page?
Étape 2: Souhaitez-vous ajouter des commentaires?
Ce formulaire a pour seul but de nous faire part de vos commentaires.