MFC-L2720DW
![]() |
FAQ & Fehlerbehebung |
![](/g/b/img/product/mfcl2720dw_us_eu_as.jpg)
MFC-L2720DW
Datum: 11.05.2015 Kennnummer: faq00002647_003
When I send a fax from the machine, an error "not register." or "not registered." is displayed.
The Fax to server may be On and this may cause the issue.
To resolve the issue make sure that Fax to server is Off. There are two ways to change the settings of Fax to server: by using the control panel and by using the Web Based Management.
Choose the appropriate way and follow the steps below.
Method 1: Using the control panel
-
Press
(Settings) > All Settings > Network > Fax to Server.
-
Press On.
-
Press Prefix.
-
Enter the prefix (up to 40 characters) using the keyboard on the LCD, and then press OK.
-
Press Suffix.
-
Enter the suffix (up to 40 characters) using the keyboard on the LCD, and then press OK.
-
Press
(Home).
Method 2: Using the Web Based Management
-
Start your web browser.
-
Type "http://machine's IP address/" into your browser's address bar (where "machine's IP address" is your machine's IP address).
For example: http://192.168.1.2/
-
Click Fax and Fax to Server.
-
Choose Off.
- Click Submit.
MFC-L2720DW, MFC-L2740DW
Wenn Sie weitere Unterstützung benötigen, wenden Sie sich an den Brother-Kundendienst:
Rückmeldung zum Inhalt
Helfen Sie uns dabei, unseren Support zu verbessern und geben Sie uns unten Ihre Rückmeldung.
Schritt 1: Wie hilfreich sind für Sie die Informationen auf dieser Seite?
Schritt 2: Möchten Sie noch ein paar Bemerkungen hinzufügen?
Bitte beachten Sie, dass dieses Formular nur für Rückmeldungen verwendet wird.