HL-1240
![]() |
FAQ et Diagnostic |
![](/g/b/img/product/hl1240_all.jpg)
HL-1240
Date: 19.11.2007 ID: faq00002249_000
The Drum LED is still lit even after replacing the old drum unit with a new one. What can I do?
![](/g/b/img/faqend/faq00002249_000/eu_ot/en/7140/drnearend.gif)
If the Drum LED is still lit after replacing the drum unit, the Drum counter may not be reset.
Reset the Drum counter as follows:
Do not reset the Drum counter when you do not replace the Drum unit.
- Open the front cover.
- Locate the control panel button under the LED lights on the left side.
- Press the control panel button until all lights are lit, then release it.
The Drum counter is now reset.
![](/g/b/img/faqend/faq00002249_000/eu_ot/en/13271/ConPane02.gif)
FAQ connexes
HL-1030, HL-1230, HL-1240, HL-1250, HL-1270N, HL-1440, HL-1450, HL-1470N
Pour toute assistance supplémentaire, contactez le service clientèle de Brother:
Commentaires sur le contenu
Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.
Étape 1: Comment qualifieriez-vous les informations figurant sur cette page?
Étape 2: Y a-t-il des commentaires que vous voudriez ajouter?
Ce formulaire a pour seul but de nous faire part de vos commentaires.