MFC-9120CN
FAQ & Fehlerbehebung |
MFC-9120CN
Datum: 25.04.2013 Kennnummer: faq00002031_005
The toner does not fix to paper well. (Poor fixing)
Please check the following points:
Step 1:
- Check that you use the paper that meets our specification.
Please refer to "What is the recommended paper?".
- Check that the drum units and toner cartridges are installed properly.
Please refer to the instructions, "How do I replace a drum unit?" and "How do I replace the toner cartridge?".
If you still have a print quality problem, please go to the Step 2.
Step 2:
- Make sure that two gray levers inside the back cover, one on the left-hand side and one on the right-hand side, are in the up position.
- Make sure that the media type settings in the printer driver and in the machine's Paper Type menu matches the type of paper you are using.
-
Choose Improve Toner Fixing mode in the printer driver as follows.
If this selection does not provide enough improvement, select Thicker paper in Media Type settings.
NOTE: Illustrations shown below may vary depending on your Operating System (OS).
For Windows printer driver:- Open the Printing Preferences dialog box and click Advanced tab.
- Click on Other Print Options.
- Select "Improve Print Output" for Printer Function and select "Improve Toner Fixing" for Improve Print Output.
Click on OK.
For Windows BR-Script printer driver:
- Open the Printing Preferences dialog box and click on Advanced.
- Select "Improve Toner Fixing" for Improve Print Output.
Click on OK.
For Macintosh printer driver:
- Open Print dialog. (Click here to see the details of how to open Print dialog.)
- Click Advanced tab in the Print Settings list.
- Click on Improve Print Output.
- Select "Improve Toner Fixing" for Improve Print Output.
Click on OK.
[ Mac OS X 10.3.9 or 10.4 ]
- Open Print dialog. (Click here to see the details of how to open Print dialog.)
- Select "Set 3" for Feature Sets in the Printer Features list.
- Select "Improve Toner Fixing" for Improve Print Output.
[ Mac OS X 10.5 or later users ]
- Open Print dialog. (Click here to see the details of how to open Print dialog.)
- Select "General 2" for Feature Sets in the Printer Features list.
- Select "Improve Toner Fixing" for Improve Print Output.
DCP-9010CN, MFC-9120CN, MFC-9320CW
Wenn Sie weitere Unterstützung benötigen, wenden Sie sich an den Brother-Kundendienst:
Rückmeldung zum Inhalt
Helfen Sie uns dabei, unseren Support zu verbessern und geben Sie uns unten Ihre Rückmeldung.
Schritt 1: Wie hilfreich sind für Sie die Informationen auf dieser Seite?
Schritt 2: Möchten Sie noch ein paar Bemerkungen hinzufügen?
Bitte beachten Sie, dass dieses Formular nur für Rückmeldungen verwendet wird.