DCP-9020CDW
![]() |
FAQ et Diagnostic |
![](/g/b/img/product/dcp9020cdw_eu.jpg)
DCP-9020CDW
Date: 29.01.2013 ID: faq00000309_021
Jam Rear
If the machine's display shows the message Jam Rear, a paper jam occurred behind the back cover. Follow the steps below to clear the message Jam Rear.
NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.
- Leave the machine turned on for 10 minutes for the internal fan to cool the extremely hot parts inside the machine.
- Open the back cover.
- Pull the green tabs at the left and right sides toward you to release the fuser cover (1).
- Use both hands to gently pull the jammed paper out of the fuser unit.
- Close the fuser cover (1). Make sure the green tabs at the left and right sides lock into place.
- Close the back cover until it locks in the closed position.
DCP-9015CDW, DCP-9020CDW, MFC-9140CDN, MFC-9330CDW, MFC-9340CDW
Pour toute assistance supplémentaire, contactez le service clientèle de Brother:
Commentaires sur le contenu
Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.
Étape 1: Comment qualifieriez-vous les informations figurant sur cette page?
Étape 2: Y a-t-il des commentaires que vous voudriez ajouter?
Ce formulaire a pour seul but de nous faire part de vos commentaires.