TD-4420TN
![]() |
FAQ et Diagnostic |
![](/g/b/img/product/lptd4420tneus.jpg)
TD-4420TN
Date: 2019-08-29 ID: faqp00100470_000
How to reset the printer by directly operating the printer
Printer initialization clears the printer's DRAM and restores its factory settings.
To activate printer initialization, do the following:
- Turn off the printer.
- Press and hold the Feed/Pause Button and then turn on the printer.
-
Release the button when the LED is lit in green (5 times) after the amber LED flashes five times.
The LED color will change in the following order:
Amber > Red (5 times) > Amber (5 times) > Green (5 times) (Release the button here) > Green/Amber (blinks 5 times alternately) > Red/Amber (blinks 5 times alternately) > Green (lit)
After the initialization, the printer will be re-sorted to its factory settings:Parameter Default setting Speed (TD-4420TN) 76 mm/sec (3 ips) (203 dpi) (TD-4520TN) 76 mm/sec (3 ips) (300 dpi) Density 8 Label Width 101.5 mm (4") Label Height 101.5 mm (4") Sensor Type Gap sensor Gap Setting 3 mm (0.12") Print Direction 0 Reference Point 0,0 (upper left corner) Offset 0 Tear Mode On Label Peeler off Mode Off Cutter Mode Off Code Page 850 Country Code 1 Clear Flash Memory No You can also calibrate by using the BPM (Brother Printer Management Tool).
Pour obtenir une aide supplémentaire, contactez le service à la clientèle Brother:
Remarques sur le contenu
Pour nous aider à améliorer notre soutien, veuillez nous faire part de vos commentaires ci-dessous.
Étape 1: Les informations fournies sur cette page vous ont-elles été utiles?
Étape 2: Y a-t-il des commentaires que vous voudriez ajouter?
Veuillez noter que ce formulaire est utilisé pour le retour d'informations seulement.