TD-4420TN
FAQ et Diagnostic |
TD-4420TN
Date: 2020-04-14 ID: faqp00001434_011
How do I clean / maintain my printer?
> Clean the Sensors
> Clean the Tear Bar/ Peel Bar
> Clean the Exterior/ Interior
-
Open the Roll Compartment Cover by pressing the tabs on both sides of the printer.
-
Push the print head release button to open the print head mechanism.
- Turn off the printer.
-
Use compressed air or vacuum to clean the Gap Sensor (1) and Black Mark Sensor (2).
1. Gap Sensor
2. Black Mark SensorWe recommend cleaning the sensors as required.
< Clean the Tear Bar/ Peel Bar >
-
Open the Roll Compartment Cover by pressing the tabs on both sides of the printer.
-
Wipe the tear bar or peel bar with a lint-free cloth dipped in isopropyl alcohol or ethanol, as needed.
1. Tear Bar 2. Peel Bar
< Clean the Exterior/ Interior >
Exterior: Wipe it with a lint-free cloth dipped in water, as needed.
Interior: Use a brush or vacuum, as needed.
Remarques sur le contenu
Pour nous aider à améliorer notre soutien, veuillez nous faire part de vos commentaires ci-dessous.
Étape 1: Les informations fournies sur cette page vous ont-elles été utiles?
Étape 2: Y a-t-il des commentaires que vous voudriez ajouter?
Veuillez noter que ce formulaire est utilisé pour le retour d'informations seulement.