ADS-2400N
![]() |
FAQ et Diagnostic |
![](/g/b/img/product/ads2400n_all.jpg)
ADS-2400N
Date: 2015-11-25 ID: faq00002541_020
Clean the roller
Follow the steps below to clean the Pick up roller and Reverse Roller.
NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.
- Unplug the machine from the AC power outlet (electrical socket).
-
Remove the Automatic Document Feeder (ADF) while releasing the levers on the back side.
-
Open the Front Cover (1).
-
Pinch both sides of the Reverse Roller Cover (1) and pull the Cover down.
-
To remove the Reverse Roller, grab its shaft and pull it toward you and out to the right.
- Clean the Reverse Roller with a soft, lint-free cloth slightly moistened with water.
-
Slide the Reverse Roller (1) into the opening on the left and place it back into the machine.
- Close the Reverse Roller Cover.
-
Clean the Pick Up Roller from side to side with a soft lint-free cloth slightly moistened with water.
- Close the Front Cover and attach the ADF.
- Plug the power cord back into the AC power outlet (electrical socket).
-
Do one of the following:
(For the models with machine's display (hereinafter called LCD))
When the LCD instructs you to reset the counter, follow the instructions on the display.
(For the models without LCD)- Open the Front Cover.
-
Press
for about five seconds until the machine beeps to reset the periodic cleaning counter.
Pour obtenir une aide supplémentaire, contactez le service à la clientèle Brother:
Remarques sur le contenu
Pour nous aider à améliorer notre soutien, veuillez nous faire part de vos commentaires ci-dessous.
Étape 1: Les informations fournies sur cette page vous ont-elles été utiles?
Étape 2: Y a-t-il des commentaires que vous voudriez ajouter?
Veuillez noter que ce formulaire est utilisé pour le retour d'informations seulement.