HL-1030
![]() |
FAQ et Diagnostic |
![](/g/b/img/product/hl1030_all.jpg)
HL-1030
Date: 2013-05-14 ID: faq00000456_000
Why are the ready and alarm lights blinking?
When the printer "Ready" and "Alarm" LEDs flash as shown, please check the following points.
![](/g/b/img/faqend/faq00000456_000/us_ot/en/92503/er-paper.gif)
Paper Jam:
Clear the paper jam referring to "How do I clear paper jams?".
If the printer does not automatically resume printing, press the control panel button.
No Paper/ Misfeed:
-
The paper cassette may be out of paper or not properly installed.
If it is empty, load a new stack of paper into the paper cassette.
If there is paper in the paper cassette, make sure it is straight.
If the paper is curled, straighten it before printing. Sometimes it is helpful to remove the paper, turn the stack over and put it back in the paper cassette. -
Reduce the amount of paper in the paper cassette, and then try again.
-
Make sure you use paper that meets Brother's recommended paper specifications.
-
Reinstall the paper properly, and then press the control panel button. The
printer will start printing again.
FAQ connexes
- What do the LED indications mean?
- Why are all the lights blinking then the drum light blinking?
- Why does the Drum LED light?
- Why are the alarm and data lights blinking?
- The Drum LED is still lit even after replacing the old drum unit with a new one. What can I do?
- Why are the alarm and data lights on?
HL-1030, HL-1230, HL-1240, HL-1250, HL-1270N, HL-1435, HL-1440, HL-1450, HL-1470N
Pour obtenir une aide supplémentaire, contactez le service à la clientèle Brother:
Remarques sur le contenu
Pour nous aider à améliorer notre soutien, veuillez nous faire part de vos commentaires ci-dessous.
Étape 1: Les informations fournies sur cette page vous ont-elles été utiles?
Étape 2: Y a-t-il des commentaires que vous voudriez ajouter?
Veuillez noter que ce formulaire est utilisé pour le retour d'informations seulement.