FAQ et Diagnostic

Fermer

MFC-8950DW

FAQ et Diagnostic

FAQ et Diagnostic

Date: 2012-03-29 ID: faq00000016_019

Page skewed

Print Quality Problem - Page skewed

 

Please check the following points to solve the problem:


NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.

  • Make sure that the paper guides are set correctly. If the guides are too tight or too loose against the paper stack, slide the paper guides to fit the paper size.

    Slide paper guide

  • If you are using the MP tray, make sure the paper guides touch the side of the paper and the paper stays under the maximum paper mark (1).


    For Printer models:


    Under maximum paper mark

    For MFC/DCP models:


    Under the maximum paper mark

  • The paper tray may be too full. Make sure that the paper is below the maximum paper mark (1). If the paper is over the maximum paper mark, reduce the quantity of paper until the maximum paper mark appears.

    Below maximum paper mark

  • Check the paper type and quality.
    Please refer to FAQs "What kind of paper can I use? " and "What is the recommended paper?"

  • Check for loose objects such as torn paper inside the machine.

  • If the problem only occurs during 2-sided(duplex) printing, check for torn paper in the duplex tray, verify that the duplex tray is inserted completely and verify that the back cover is closed completely.

 

Pour obtenir une aide supplémentaire, contactez le service à la clientèle Brother:

Remarques sur le contenu

Pour nous aider à améliorer notre soutien, veuillez nous faire part de vos commentaires ci-dessous.
Étape 1: Les informations fournies sur cette page vous ont-elles été utiles?
Étape 2: Y a-t-il des commentaires que vous voudriez ajouter?

Veuillez noter que ce formulaire est utilisé pour le retour d'informations seulement.