DCP-1512
![]() |
Perguntas frequentes e Solução de problemas |
![](/g/b/img/product/dcp1512_us_eu.jpg)
DCP-1512
Data: 21/11/2013 ID: faq00002674_001
Fuser Error or Self-Diagnostic
- The temperature of the fuser unit does not rise to a specified temperature within the specified time.
- The fuser unit is too hot.
Please follow the steps below to solve the problem:
- Turn the machine's power switch off, wait a few seconds, and then turn it on again.
- Leave the machine for 15 minutes with the power on.
- If the error still remains, please contact Brother Customer Service from "Contact Us" or call your dealer and report the error status, Fuser Error or Self-Diagnostic.
Se você precisar de assistência adicional, entre em contato com o atendimento ao cliente da Brother:
Comentários sobre o conteúdo
Para ajudar-nos a melhorar nosso suporte, forneça seus comentários abaixo.
Passo 1: quanto as informações nesta página auxiliaram você?
Passo 2: Vvocê gostaria de acrescentar algum comentário?
Note que este formulário é utilizado apenas para comentários.