HL-5280DW
![]() |
Perguntas frequentes e Solução de problemas |
![](/g/b/img/product/hl5280dw_all.jpg)
HL-5280DW
Data: 22/09/2011 ID: faq00000504_002
Where is the Auto 2-sided(Duplex) setting option in the Mac OS X 10.3 driver or greater?
Refer to the instructions below:
Automatic 2-sided(duplex) printing from the paper tray
- Choose "Print" from the File menu and open the Print dialogue.
- Choose "Layout". You will find the "Two-Sided" section.
- Choose "Long-edged binding" or "Short-edged binding".
![](/g/b/img/faqend/faq00000504_002/us_ot/en/16315/5250_autodpx.gif)
- Click on Print.
Automatic 2-sided(duplex) printing from the MP tray
- Open the MP tray and lower it gently.
![](/g/b/img/faqend/faq00000504_002/us_ot/en/16310/dpx1.gif)
-
Pull out the MP tray support flap.
![](/g/b/img/faqend/faq00000504_002/us_ot/en/16311/dpx2.gif)
-
Lift up the support flap to prevent paper from sliding off the face-down output tray, or remove each page as soon as it comes out of the printer.
![](/g/b/img/faqend/faq00000504_002/us_ot/en/16312/dpx3.gif)
- Put paper in the MP tray. Make sure that the paper stays under the maximum paper mark on both sides of the tray.
![](/g/b/img/faqend/faq00000504_002/us_ot/en/16313/dpx4.gif)
- While pressing the paper-guide release lever, slide the paper guide to fit the paper size.
![](/g/b/img/faqend/faq00000504_002/us_ot/en/16314/dpx5.gif)
- Choose "Print" from the File menu and open the Print dialogue.
- Choose "Layout". You will find the "Two-Sided" section.
- Choose "Long-edged binding" or "Short-edged binding".
![](/g/b/img/faqend/faq00000504_002/us_ot/en/16315/5250_autodpx3.gif)
- Click on Print.
Perguntas frequentes relacionadas
Se você precisar de assistência adicional, entre em contato com o atendimento ao cliente da Brother:
Comentários sobre o conteúdo
Para ajudar-nos a melhorar nosso suporte, forneça seus comentários abaixo.
Passo 1: quanto as informações nesta página auxiliaram você?
Passo 2: Vvocê gostaria de acrescentar algum comentário?
Note que este formulário é utilizado apenas para comentários.