DCP-J140W
Perguntas frequentes e Solução de problemas |
DCP-J140W
Data: 26/09/2014 ID: faq00000366_016
Out of Memory
There are some cases when the LCD shows this message. Follow the solution suitable for your case.
-
Cause 1: The machine's memory is full.
Press Stop/Exit and wait until the other operations in progress finish and then try again.
If the Out of Memory message appears while scanning a document, press Stop/Exit to cancel or Black (Mono) Start to send the scanned pages.
If more than one page has been scanned, press Black (Mono) Start to send the portion that is in the machine's memory. -
Cause 2: The memory card or USB Flash memory drive you are using does not have enough free space to scan the document.
(For applicable machines)
Delete unused files from your memory card or USB Flash memory drive to make some free space and then try again.
DCP-J105, DCP-J140W, MFC-J430W
Se você precisar de assistência adicional, entre em contato com o atendimento ao cliente da Brother:
Comentários sobre o conteúdo
Para ajudar-nos a melhorar nosso suporte, forneça seus comentários abaixo.
Passo 1: quanto as informações nesta página auxiliaram você?
Passo 2: Vvocê gostaria de acrescentar algum comentário?
Note que este formulário é utilizado apenas para comentários.