TJ-4422TN
ЧЗВ и отстраняване на неизправности |
TJ-4422TN
Дата: 28/09/2020 Идентификационен номер: faqp00100467_004
How to clean the Print Head
Clean the Print Head when replacing the label roll with a new one.
- Always turn off the printer before cleaning the Print Head.
- Allow the Print Head to cool down for at least one minute.
- Turn off the printer.
-
Open the Media Cover.
-
Push the Print Head Release Lever to open the Print Head.
-
Wipe the Print Head with a cotton swab dipped in isopropyl alcohol or ethanol.
1. Cotton Swab
2. Print Head Surface
3. Print Head -
Close the Print Head by pushing down on both sides and make sure it locks into place.
-
Close the Media Cover.
Свързани ЧЗВ
Ако ви е необходимо допълнително съдействие, моля, свържете се с центъра за клиенти на Brother:
Обратна връзка за съдържанието
За да ни помогнете да подобрим нашата поддръжка, моля, оставете вашата обратна връзка по-долу.
Стъпка 1: Как ви помага информацията на тази страница?
Стъпка 2: Искате ли да добавите коментар?
Имайте предвид, че този формуляр се използва само за обратна връзка.