Innov-is XP1
![]() |
ЧЗВ и отстраняване на неизправности |
![](/g/b/img/product/hf_inovxp1euk.jpg)
Innov-is XP1
Дата: 24/09/2019 Идентификационен номер: faqh00000639_004
How do I attach or remove the embroidery frame ?
Wind and insert the bobbin before attaching the embroidery frame.
Attaching the Embroidery Frame
-
Press the Presser Foot Lifter button to raise the presser foot.
-
Align the embroidery frame guide with the right edge of the embroidery frame holder.
(1) Embroidery frame holder
(2) Embroidery frame guide
-
Slide the embroidery frame into the holder,
making sure to align the embroidery frame’swith the holder’s
.
(1) Arrow mark
-
Lower the frame-securing lever to be level with the frame to secure the embroidery frame in the embroidery frame holder.
(1) Frame-securing lever If the frame-securing lever is not lowered, the message Make sure embroidery frame is moved as far back as possible. LOCK DOWN THE FRAME-SECURING LEVER. appears. You cannot start embroidering until you lower the framesecuring lever.
Removing the Embroidery Frame
-
Press the Presser Foot Lifter button to raise the presser foot.
-
Raise the frame-securing lever.
-
Pull the embroidery frame toward you.
Ако ви е необходимо допълнително съдействие, моля, свържете се с центъра за клиенти на Brother:
Обратна връзка за съдържанието
За да ни помогнете да подобрим нашата поддръжка, моля, оставете вашата обратна връзка по-долу.
Стъпка 1: Как ви помага информацията на тази страница?
Стъпка 2: Искате ли да добавите коментар?
Имайте предвид, че този формуляр се използва само за обратна връзка.