Innov-is Ie
ЧЗВ и отстраняване на неизправности |
Innov-is Ie
Дата: 14/05/2015 Идентификационен номер: faqh00000391_002
The "Pivot" key can not be selected.
-
If "NEEDLE POSITION-UP/DOWN" in the machine settings screen is set to the raised position, the pivot function cannot be used. In that case, the key appears as a dotted line and is not available.
In the following procedures, please change setting.- Press .
- On the machine settings screen, select for the "NEEDLE POSITION-UP/DOWN".
-
When the setting is selected, the pivot function can only be used with stitches where presser foot J, N, C or O is indicated in the upper-left corner of the screen.
If any other stitch is selected, the key appears as a dotted line and is not available.
Please change the stitch.
Ако ви е необходимо допълнително съдействие, моля, свържете се с центъра за клиенти на Brother:
Обратна връзка за съдържанието
За да ни помогнете да подобрим нашата поддръжка, моля, оставете вашата обратна връзка по-долу.
Стъпка 1: Как ви помага информацията на тази страница?
Стъпка 2: Искате ли да добавите коментар?
Имайте предвид, че този формуляр се използва само за обратна връзка.