DCP-J4120DW
ЧЗВ и отстраняване на неизправности |
DCP-J4120DW
Дата: 25/12/2017 Идентификационен номер: faq00100427_006
Set up a Brother machine and your mobile device on a wireless network
You can use a wireless router or access point to connect your Brother machine to your mobile device.
Do you have a wireless router or access point?
No, I do not have a wireless router or access point. |
Yes, I have a wireless router or access point. |
||
отидете на .click here | отидете на .click here |
1. Connect your Brother machine to your mobile device without using a wireless router
You can set up a wireless network connection between your machine and a mobile device without using a wireless router or access point.
Follow the steps below to set up a Brother machine on a wireless network with a wireless router or access point.
Настройка на устройството
- Натиснете бутон Save.
- Натиснете Network.
- Press Wi-Fi Direct.
- Press Group Owner.
- Press Manual.
- When Wi-Fi Direct On? appears, press 1 to enable the Wi-Fi Direct network. You will need this information later.
1.2 Set up your mobile device
When you have finished setting up your Brother machine, follow the instructions below:
Android™ | iPhone®, iPod touch®, iPad™ |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2. Connect your Brother machine to your mobile device using a wireless router
To set up your Brother machine on a wireless network with a wireless router or access point, follow the steps below.
2.1 Before you set up your connection
Write down the Network Name (SSID) and Network Key (Password) of your wireless router or access point. You will need this information later.
After checking the network information of your wireless router or access point, go to the next step.
2.2 Set up the Brother machine
- Press Wi-Fi.
- Натиснете Помощ.за настр.
- When the question Switch Network interface to wireless? or Network I/F switched to Wireless. or Enable WLAN? appears, press Yes to accept. The wireless setup wizard starts.
- Устройството ще сканира за налични мрежи и ще покаже списък с SSID. Select the Network Name (SSID) you wrote down earlier. Натиснете OK.
- If the machine asks to use WPS, select No.
- Въведете WEP key (ключ) който записахте по-рано и натиснете OK.
- Натиснете OK.
- След това натиснете Да, за да приложите към вашите настройки.
-
The machine tries to connect to the device you have selected.
If your mobile device connected successfully If the connection failed The machine's LCD displays Connected.
The machine will print a wireless connection report. Check the error code on the printed report.
The machine will print a wireless connection report.
For more information about error codes and solutions, click here.
2.3 Set up your mobile device
When finished configuring your Brother machine, do one of the following to configure your mobile device:
Android™ | iPhone®, iPod touch®, iPad™ |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DCP-J4120DW, MFC-J5320DW
Ако ви е необходимо допълнително съдействие, моля, свържете се с центъра за клиенти на Brother:
Обратна връзка за съдържанието
Имайте предвид, че този формуляр се използва само за обратна връзка.