HL-6050D
![]() |
ЧЗВ и отстраняване на неизправности |
![](/g/b/img/product/hl6050d_all.jpg)
HL-6050D
Дата: 27/01/2014 Идентификационен номер: faq00000310_000
"JAM DUPLEX" error appears on the LCD.
Follow the instructions below to clear a paper jam:
-
Open the back output tray.
-
Use both hands to slowly pull the jammed paper out of the fuser unit.
-
Close the back output tray.
If the paper jam cannot be cleared, go to the next step.
-
Pull the duplex tray and paper tray out of the printer.
-
Pull the jammed paper out of the printer.
-
Put the duplex tray and paper tray back in the printer.
- The JAM DUPLEX message appears if you remove a sheet of paper from the face down output tray after only one side has printed.
- The paper sizes you can use with the 2-sided(duplex) printing function are A4, Letter or Legal.
- If the paper adjustment lever for 2-sided(duplex) printing is not set correctly for the paper size, paper jams may occur and the printing will be out of position on the page.
![](/g/b/img/faqend/faq00000310_000/eu_ot/en/92322/60_068.gif)
Свързани ЧЗВ
Ако ви е необходимо допълнително съдействие, моля, свържете се с центъра за клиенти на Brother:
Обратна връзка за съдържанието
За да ни помогнете да подобрим нашата поддръжка, моля, оставете вашата обратна връзка по-долу.
Стъпка 1: Как ви помага информацията на тази страница?
Стъпка 2: Искате ли да добавите коментар?
Имайте предвид, че този формуляр се използва само за обратна връзка.