MFC-J6910DW
 |
FAQs & Troubleshooting |
MFC-J6910DW
Date: 27/05/2011 ID: faq00000615_005
How do I forward a fax to another fax machine when my machine has a mechanical problem?
You can transfer faxes in the memory of your machine if one of the following messages is displayed on the LCD:
- Unable to Clean XX (Clean Unable XX)
- Unable to Init. XX (Init Unable XX)
- Unable to Print XX (Print Unable XX)
- Unable to Scan XX (Scan Unable XX)
- Unable to use Phone XX
- Press Stop/Exit to interrupt the error temporarily.
- Press MENU and choose Service => Data Transfer => Fax Transfer.
- Do one of the following:
- If the LCD shows No Data, there are no faxes left in the machine's memory.
Press Stop/Exit.
- Enter the fax number to which faxes will be forwarded.
- If the LCD shows No Data, there are no faxes left in the machine's memory.
- Press Black Start or Mono Start.
- If you have not set up your Station ID, you cannot enter fax transfer mode. Please refer to the instructions, What is the "Station ID" and how do I set it?.
- You can send the Fax Journal report to another fax machine.
Press MENU and choose Service => Data Transfer => Report Trans. in Step2.
Related FAQs
MFC-6890CDW, MFC-790CW, MFC-795CW, MFC-990CW, MFC-J5910DW, MFC-J625DW, MFC-J6910DW, MFC-J825DW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.