PT-P900W/P900Wc
FAQ & Fehlerbehebung |
PT-P900W/P900Wc
Datum: 03.12.2019 Kennnummer: faqp00100008_001
The label does not cut well.
If the label does not cut well or tape is jammed in the cutter, tape adhesive may have built up on the cutter blades after repeated use. To correct this problem, the tape cutter must be cleaned.
Cleaning the tape cutter
Wipe the cutter blades using a dry cotton swab.
-
Frequent cleaning is recommended.
- Cutter blade
- Cotton swab
-
Metal section
Do not touch the cutter blade with your bare hands.
If the problem still occurs, download and install the latest version of the firmware from the [Downloads] section of this website.
PT-P900W/P900Wc, PT-P950NW
Wenn Sie weitere Unterstützung benötigen, wenden Sie sich an den Brother-Kundendienst:
Rückmeldung zum Inhalt
Helfen Sie uns dabei, unseren Support zu verbessern und geben Sie uns unten Ihre Rückmeldung.
Schritt 1: Wie hilfreich sind für Sie die Informationen auf dieser Seite?
Schritt 2: Möchten Sie noch ein paar Bemerkungen hinzufügen?
Bitte beachten Sie, dass dieses Formular nur für Rückmeldungen verwendet wird.