PJ-723
FAQ & Fehlerbehebung |
PJ-723
Datum: 02.07.2020 Kennnummer: faqp00001469_005
How to install the rechargeable Li-ion battery (optional)
Installing the rechargeable Li-ion battery
- Move the Battery Latch 1 to the unlock position.
-
While holding the Battery Latch 2 in the unlock position, remove the Battery Cavity Mounting Block.
1. Battery Latch 1
2. Battery Latch 2
3. Battery Cavity Mounting Block -
Release the Battery Latch 2.
The Battery latch 2 moves back to the lock position. -
Insert the battery into the battery cavity until it locks into place.
4. Battery cavity
5. Rechargeable Li-ion battery -
Move the Battery Latch 1 to the lock position.
- The voltage supplied by the rechargeable Li-ion battery may vary. The printing speed may also vary depending on the voltage.
- When the battery is being used, the battery cavity mounting block is not needed. Keep it in a safe place to avoid losing it.
Removing the rechargeable Li-ion battery
-
Move the Battery Latches to the unlock position, and then remove the battery.
1. Battery latches - Insert the Battery Cavity Mounting Block into the battery cavity until it locks into place.
- Move the Battery Latch 1 to the lock position.
Relevante FAQ
PJ-722, PJ-723, PJ-762, PJ-763MFi, PJ-773
Wenn Sie weitere Unterstützung benötigen, wenden Sie sich an den Brother-Kundendienst:
Rückmeldung zum Inhalt
Helfen Sie uns dabei, unseren Support zu verbessern und geben Sie uns unten Ihre Rückmeldung.
Schritt 1: Wie hilfreich sind für Sie die Informationen auf dieser Seite?
Schritt 2: Möchten Sie noch ein paar Bemerkungen hinzufügen?
Bitte beachten Sie, dass dieses Formular nur für Rückmeldungen verwendet wird.