PT-7500
![]() |
FAQ & Fehlerbehebung |
![](/g/b/img/product/7500euk.jpg)
PT-7500
Datum: 17.06.2020 Kennnummer: faqp00001287_008
How do I make a label with a barcode?
Please follow the steps below:
-
Set bar code parameters
-
Press
, then
.
-
Press
or
until the parameter that you wish to change is displayed.
-
Press
or
until the desired setting is displayed.
- Repeat the step "b" and the step "c" until all parameters are set as you wish.
-
Press
.
-
Press
-
Enter the bar code data
-
Press
.
- Type in the new bar code data or edit the old data.
-
Press
-
Add the bar code to the text
-
Press
to add the bar code to the text.
-
Press
The following bar code parameters are available:
Parameter | Settings |
---|---|
PROTOCOL | CODE 39, I-2/5, EAN13, EAN8, UPC-A, UPC-E, CODABAR, EAN128, CODE128 |
WIDTH (bar width) | SMALL, MEDIUM, LARGE |
UNDER# (numbers printed below bar code) | ON, OFF |
CHECK DIGIT* | OFF, ON |
*The CHECK DIGIT parameter is available only with the CODE 39, I-2/5 and CODABAR protocols.
PT-2470, PT-7500, PT-7600
Wenn Sie weitere Unterstützung benötigen, wenden Sie sich an den Brother-Kundendienst:
Rückmeldung zum Inhalt
Helfen Sie uns dabei, unseren Support zu verbessern und geben Sie uns unten Ihre Rückmeldung.
Schritt 1: Wie hilfreich sind für Sie die Informationen auf dieser Seite?
Schritt 2: Möchten Sie noch ein paar Bemerkungen hinzufügen?
Bitte beachten Sie, dass dieses Formular nur für Rückmeldungen verwendet wird.