MFC-J890DW
FAQ & Fehlerbehebung |
MFC-J890DW
Datum: 23.01.2020 Kennnummer: faq00100360_502
Check the Print Alignment from Your Brother Machine
If your printed text becomes blurred or images become faded after transporting the machine, adjust the print alignment.
DCP-J572DW/MFC-J491DW/MFC-J497DW
- Press Settings.
- Press or to select the following:
- Select [General Setup]. Press OK.
- Select [Maintenance]. Press OK.
- Select [Impr. PrintQuality]. Press OK.
- Select [Alignment]. Press OK.
- Press .
- Press again.The machine starts printing the Alignment Check Sheet.
- For pattern (A), press or to select the number of the test print that has the fewest visible vertical stripes (1-9), and then press OK.
In the example above, row number 6 is the best choice.
Repeat this step for the rest of the patterns.
When the print alignment is not adjusted correctly, text looks blurry or crooked, like this.
After the print alignment is adjusted correctly, text looks like this.
- Press Stop/Exit.
DCP-J772DW/DCP-J774DW/MFC-J890DW/MFC-J895DW
- Press .You can also press.
- Press [Next].
- Press [Start].The machine prints the Alignment Check Sheet.
- For the (A) pattern, press or to display the number of the test print with the fewest visible vertical stripes (1-9), and then press it (in the example above, row number 6 is the best choice). Press [OK].
Repeat this step for the rest of the patterns.
When the print alignment is not adjusted correctly, text looks blurry or crooked, like this.
After the print alignment is adjusted correctly, text looks like this.
- Press .
DCP-J572DW, DCP-J772DW, DCP-J774DW, MFC-J491DW, MFC-J497DW, MFC-J890DW, MFC-J895DW
Wenn Sie weitere Unterstützung benötigen, wenden Sie sich an den Brother-Kundendienst:
Rückmeldung zum Inhalt
Helfen Sie uns dabei, unseren Support zu verbessern und geben Sie uns unten Ihre Rückmeldung.
Schritt 1: Wie hilfreich sind für Sie die Informationen auf dieser Seite?
Schritt 2: Möchten Sie noch ein paar Bemerkungen hinzufügen?
Bitte beachten Sie, dass dieses Formular nur für Rückmeldungen verwendet wird.