MFC-J5330DW
FAQ & Fehlerbehebung |
MFC-J5330DW
Datum: 31.07.2024 Kennnummer: faq00002316_501
Clean the Paper Feed Rollers
If the paper feed rollers are stained with ink or have a buildup of paper dust, it may cause paper feed problems.
- Unplug the machine from the electrical socket.
- If the paper support flap is open, close it, and then close the paper support.
- Pull the paper tray (1) completely out of the machine as shown by the arrow.
- Lift the paper support (1), and then pull it at an angle completely out of the machine as shown by the arrow.
- Clean the front side of the Paper Feed Rollers (1) with a soft lint-free cloth moistened with water, using a side-to-side motion. After cleaning, wipe the rollers with a dry, soft lint-free cloth to remove all moisture.
- Lift the Jam Clear Flap (2), and then clean the back side of the Paper Feed Rollers (1) with a soft lint-free cloth moistened with water. After cleaning, wipe the rollers with a dry, soft lint-free cloth to remove all moisture.
- Put the paper support firmly back in the machine. Make sure you fit the paper support into the channels.
- Slowly push the paper tray completely into the machine.
- Reconnect the power cord.Do not use the machine again until the rollers are dry. Using the machine before the rollers are dry may cause paper feed problems.
MFC-J5330DW, MFC-J5335DW, MFC-J5730DW, MFC-J5930DW
Wenn Sie weitere Unterstützung benötigen, wenden Sie sich an den Brother-Kundendienst:
Rückmeldung zum Inhalt
Helfen Sie uns dabei, unseren Support zu verbessern und geben Sie uns unten Ihre Rückmeldung.
Schritt 1: Wie hilfreich sind für Sie die Informationen auf dieser Seite?
Schritt 2: Möchten Sie noch ein paar Bemerkungen hinzufügen?
Bitte beachten Sie, dass dieses Formular nur für Rückmeldungen verwendet wird.