MFC-J4710DW
![]() |
FAQ & Fehlerbehebung |
![](/g/b/img/product/mfcj4710dw_us_eu_as.jpg)
MFC-J4710DW
Datum: 03.06.2014 Kennnummer: faq00000569_010
Glossy Paper does not feed correctly.
This problem is common when using paper that exceeds the recommended thickness for the machine.
To correct the feeding problem, add more paper to the paper tray. If the paper feed does not improve, check the following steps.
Step 1. Check your paper
- Refer to "User's Guide" in the Manuals section for information on acceptable glossy paper for your Brother machine.
- To get the best print quality, we suggest using Brother Premium Glossy Paper.
Step 2. Verify the paper is loaded correctly
- Load glossy paper with the shiny side facing down. The coated side of glossy paper is shiny. Avoid touching the shiny (coated) side.
- If you are using Brother Premium Glossy Paper, load the Brother glossy paper with the instruction sheet (support sheet provided in the paper packaging) at the bottom of the stack. This helps with this problem.
-
Gently put the paper into the paper tray print side down and top edge in first. Check that the paper is flat in the tray.
Be careful that you do not push the paper in too far, it may lift at the back of the tray and cause feed problems.
Step 3. Clean the Paper Pick-up Roller
- Unplug the machine from the AC power outlet (electrical socket).
-
Pull the paper tray completely out of the machine.
If the machine starts to multi-feed the last few sheets of paper in the tray, clean the Base Pad (1) with a soft lint-free cloth moistened with water.
After cleaning, wipe the pad with a dry, soft lint-free cloth to remove all moisture. -
Clean the Paper Pick-up Rollers (1) with a soft lint-free cloth moistened with water. Slowly turn the rollers so that the whole surface is cleaned. After cleaning, wipe the rollers with a dry, soft lint-free cloth to remove all moisture.
- Put the paper tray firmly back in the machine.
-
Re-connect the power cord.
Cleaning the paper pick-up rollers for paper tray #2
- Unplug the machine from the AC power outlet (electrical socket).
-
Pull tray #2 completely out of the machine.
If the paper support flap is open, close it, and then close the paper support.
-
Clean the paper pick-up rollers for tray #2 (1) with a soft lint-free cloth moistened with water. Slowly turn the rollers so that whole surface is cleaned. After cleaning, wipe the rollers with a dry, soft lint-free cloth to remove all moisture.
- Put tray #2 firmly back in the machine.
- Re-connect power cord.
If the problem did not improve, contact Brother Customer Service from "Contact Us".
MFC-J4610DW, MFC-J4710DW, MFC-J5720DW, MFC-J5920DW
Wenn Sie weitere Unterstützung benötigen, wenden Sie sich an den Brother-Kundendienst:
Rückmeldung zum Inhalt
Bitte beachten Sie, dass dieses Formular nur für Rückmeldungen verwendet wird.