HL-5240L
![]() |
FAQ & Fehlerbehebung |
![](/g/b/img/product/hl5240l_eu.jpg)
HL-5240L
Datum: 25.10.2005 Kennnummer: faq00000402_001
The printer cannot print full pages of a document. An error message PRINT OVERRUN is printed out.
Please do the following:
-
Press Go to print the remaining data in the printer memory. Cancel the print job, if you want to delete the remaining data in the printer memory.
-
Reduce the complexity of your document or lower the print resolution.
-
Set page protection to AUTO by using the supplied Windows® driver or Remote Printer Console program.
![](/g/b/img/faqend/faq00000402_001/eu_ot/en/3316/page_protection1.gif)
- Change the following settings in the Windows® printer driver, and then try again. The best combination of the settings below will vary depending on your document:
+Graphics mode
+TrueType mode
+Use printer TrueType® fonts
To change these settings, click 'Advanced' tab of the printer driver. Select 'Manual' in the 'Print Setting' section. Click 'Setting...'.
![](/g/b/img/faqend/faq00000402_001/eu_ot/en/3317/setting2.gif)
HL-5240, HL-5240L, HL-5250DN
Wenn Sie weitere Unterstützung benötigen, wenden Sie sich an den Brother-Kundendienst:
Rückmeldung zum Inhalt
Helfen Sie uns dabei, unseren Support zu verbessern und geben Sie uns unten Ihre Rückmeldung.
Schritt 1: Wie hilfreich sind für Sie die Informationen auf dieser Seite?
Schritt 2: Möchten Sie noch ein paar Bemerkungen hinzufügen?
Bitte beachten Sie, dass dieses Formular nur für Rückmeldungen verwendet wird.